designed & dimensioned in millimeters c do not scale from this print mptc-xx-xx-xx-01-xx-x-ra-xx power positions (per end) -01, -02 right angle signal positions -80 (4 x 20) plating specification -l: see table 3 -t: see table 3 option -sd: screw down (see fig. 1, sht 1) -lc: locking clip (use lc-07-tm) (see fig. 2, sht 2) -01, -02 power positions (per end) -01: for 1.57[.062] thick pcb (use sub-t-1m40-01-x) -02: for 3.18[.125] thick pcb (use sub-t-1m40-02-x) tail length -01 leadstyle 0.41 (typ) ref .016 12.45 ref 0.50 sq .020 ref 8.18 .322 (typ) 4.44 (typ) .175 1.88 .074 2.00 .079 38.00 1.496 (19 spaces @ 2.00 [.079]) 5.38 .212 "d" 2 max sway (typ) "a" "a" "b" "b" mpt-02-ra-80-sd c3 c4 c2 01 04 01 (power) 05 c1 mpt-xx-ra-xx-xx "c" ref 3.56 .140 (typ) ref 41.40 ref 1.630 12.27 ref .483 4.06 .160 ref 15.70 .618 "b" ref "f" "f" mp-80-q 5.08 .200 ref 0.79 ref .031 "a" - 0.25 + 0.50 2.54 .100 ref 5.08 ref .200 3.25 - 0.25 + 0.13 .128 - .010 + .005 section "a"-"a" sub-t-1m40-01-xx c5 c fig. 1 mptc-01-80-01-xx-x-ra-sd shown * = see table 2 for available combinations ** = not tooled ** ** = not tooled sheet of unless otherwise specified, dimensions are in millimeters. tolerances are: decimals angles .x: 0.3 [.01] 2 .xx: 0.13 [.005] .xxx: 0.051 [.0020] material: right angle power terminal by: mptc-xx-xx-xx-01-xx-x-ra-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing clay w 2/2/2007 3 1 sheet scale: 1.5:1 insulator: lcp, color: black terminal: copper alloy f:\dwg\misc\mktg\mptc-xx-xx-xx-01-xx-x-ra-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. burr allowance: 0.038[.0015] max. 3. minimum pushout force: 2.22n [.5 lb]. 4. parts to be packaged in trays. 5. bow allowed at 0.075mm[.0030]/25.0mm[.98]. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision c
1.42 ref .056 1.42 - 0.13 + 0.20 .056 - .005 + .008 "d" lc-07-tm "f" 5.79 .228 ref 2 max sway (typ) fig. 2 mptc-01-80-01-01-xx-x-ra-lc shown (same as fig. 1, unless otherwise stated) c8 c7 0.25 ref .010 1.87 - 0.05 + 0.13 .074 - .002 + .005 c6-b-mv section "b"-"b" scale 3 : 1 c6 sheet of right angle power terminal by: mptc-xx-xx-xx-01-xx-x-ra-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing clay w 2/2/2007 3 2 sheet scale: 1.5:1 revision c f:\dwg\misc\mktg\mptc-xx-xx-xx-01-xx-x-ra-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
5.00 .197 "d" "e" c14-a-mv c12-a-mv c13-a-mv c13 c12 c14 fig. 3 mptc-02-80-02-01-xx-x-ra shown (same as fig. 1, unless otherwise stated) -01 power position -02 power position 0.50 sq ref .020 (see table 1, sheet 1) "a" .010 3.81 (typ) .150 2.00 (typ) .079 2.00 (typ) .079 2.79 .110 section "f"-"f" terminal 1 (see table 1, sheet 1) terminal 2 (see table 1, sheet 1) terminal 3 (see table 1, sheet 1) terminal 4 (see table 1, sheet 1) c9 c10 c11 "f" ref 1.00 .039 ref (typ) 1.27 .050 ref (typ) 3.30 .130 ref (typ) sheet of right angle power terminal by: mptc-xx-xx-xx-01-xx-x-ra-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing clay w 2/2/2007 3 3 sheet scale: 1.5:1 revision c f:\dwg\misc\mktg\mptc-xx-xx-xx-01-xx-x-ra-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
